SPA pipe cleaner 1 liter

• Liquid for degreasing and cleaning hydraulic circuit.
• Compound specially formulated to eliminate biofilm that forms in the circuits (pipes) of spas and hot tubs.

Properties:

• Appearance: Liquid.
• Color: Colorless.
• Density: 0.90 - 0.98 g/cm³.
• PH: 10 – 11.

Dosage and instructions for use:

• Fill the spa or hot tub with water to about 2 to 4 inches above the dispensing nozzles. You can use the same bath water.
• Add an entire bottle (500 ml) of Biofilm Cleaner to remove biofilm from spas or hot tubs between 1,000 and 3,000 liters.
• Remove the filter cartridges before starting cleaning and start the filtration and massage pump for approximately 30 minutes.
• Once cleaning is complete, the spa or hot tub must be emptied and refilled with clean water to rinse, activating both pumps (filtration and massage) for 1 to 2 minutes. After this time, empty the glass again.
• Finally, place the cartridge (new or clean) back into the filter and fill with clean water with disinfectant (chlorine or bromine).
• Bathing during the cleaning process is prohibited.
• A spa or hot tub should be cleaned about 3 to 4 times a year.